NEW – ONE OF THE STRONGEST WOODEN CANES ON THE MARKET!
WE ARE TESTING THESE CANES TO 1,000# OF COMPRESSIVE LOAD
SELFDEFENSECANES.COM has developed one of the strongest wooden canes on the market!
YES, even stronger than our big 1 1/8” solid hickory cane, which tested out to 600# of load.
The new design is a custom laid up lamination process. Each cane is hand made from oak or maple laminations. Lengths are available to 42”. We are calling this new design the “CROOK / DERBY CANE”. The crook portion of the derby has a full FOUR-INCH diameter crook for hooking or grappling, or spinning just like a standard crook cane. The back of the derby can be custom formed into a hammer head, axe head, or pointed extension. These stronger canes can also have the shafts formed into twists, sword edges, etc.
YES, even stronger than our big 1 1/8” solid hickory cane, which tested out to 600# of load.
The new design is a custom laid up lamination process. Each cane is hand made from oak or maple laminations. Lengths are available to 42”. We are calling this new design the “CROOK / DERBY CANE”. The crook portion of the derby has a full FOUR-INCH diameter crook for hooking or grappling, or spinning just like a standard crook cane. The back of the derby can be custom formed into a hammer head, axe head, or pointed extension. These stronger canes can also have the shafts formed into twists, sword edges, etc.
Above – proto-type #3 – scale tested to 1,000# before finishing - butternut wood
THIS CANE WILL REVOLUTIONIZE SELF DEFENSE CANES!
Length – 40”+, but can be cut to size for you. Shaft – octagon 1 1/16” to 1 1⁄4”. Wood – this one is built of ash, with a cherry wood accent strip. Features – a cherry wood accent strip, crook derby, top shaft grips, ten inches of double helix twist (for raking or kubaton practice), and an octagon bottom shaft.
THIS CANE WILL REVOLUTIONIZE SELF DEFENSE CANES!
Length – 40”+, but can be cut to size for you. Shaft – octagon 1 1/16” to 1 1⁄4”. Wood – this one is built of ash, with a cherry wood accent strip. Features – a cherry wood accent strip, crook derby, top shaft grips, ten inches of double helix twist (for raking or kubaton practice), and an octagon bottom shaft.
Overall width at the handle – eight inches. Crook size – four inches wide, three inches deep. Weight - at 41” O.A.L., 1# 9oz. Hand built by the master cane maker being called Dan-De-Hanzo, PRICED AT $329.00
Next, we have my favorite, a cherry-wood crook / derby cane. Top shaft grips, center shaft double helix twisted, and shaped lower shaft with finger sized serrations.
Oak laminated, wide crook, double helix twist, sword tapered bottom shaft, available at $289.00 ( SOLD )
In the white (undressed and unfinished) – a 1,000# tested solid maple lamination, currently listed at $289.00 – to be custom finished per your instructions! Sold
In the white (undressed and unfinished) – a 1,000# tested solid maple lamination, currently listed at $289.00 – to be custom finished per your instructions! Sold
Below – the Midnight Terror – midnight blue on an oak laminate, tapered derby back, viper horn, double helix twist, sword bottom shaft with finger grips. ( SOLD )
YES, IT IS TRUE – ONE OF MY 1,000# COLLECTION OF CANES ACTUALLY HELD UP THE FRONT END OF MY TRACTOR!
NEW – 1,000 # WALKING STICK, CANE, MARTIAL ARTS, CARVING MEDIUM, ETC.
This 45” tall walking stick is made of layered laminations of poplar wood, so it is perfect for carving that double axe head, winged bird, or what have you? Yet this stick withstood 1,000 # of compressive load test, so what ever you carve is more than strong enough for self-defense use. What can you envision in the blank slate this carving medium provides? The shaft is 1 3/16” by 1 1⁄4” square, and 45” tall, and the integrated head is 8.5” by 4”, bringing the overall height of the stick to 49”! Look at the photo’s – virtually NO shaft deflection under 1,000#ofload.
This 45” tall walking stick is made of layered laminations of poplar wood, so it is perfect for carving that double axe head, winged bird, or what have you? Yet this stick withstood 1,000 # of compressive load test, so what ever you carve is more than strong enough for self-defense use. What can you envision in the blank slate this carving medium provides? The shaft is 1 3/16” by 1 1⁄4” square, and 45” tall, and the integrated head is 8.5” by 4”, bringing the overall height of the stick to 49”! Look at the photo’s – virtually NO shaft deflection under 1,000#ofload.
NEWSBREAK! Self Defense Canes has done it again!
To start out 2023 we have made and tested the first 1,500 POUND SCALE TESTED cane blank!
This is currently a behemoth 42-inch-tall by ten inches wide cane blank before shaping. A five- layer hickory with heartwood blank, that scale tested at a weight of 3#-10 ounces.
ON THE LIGHTER SIDE!
These canes are really lightweight, smaller stature canes, but all 1,000 pound tested!
These canes are really lightweight, smaller stature canes, but all 1,000 pound tested!
This is a five layer laminate with a cherry wood accent strip, a 15/16” by one inch shaft, 34 inches tall, which was scale tested at 1,000# before the bottom was cut for the brass and stainless steel spike tip.
This is a study piece under construction – a 36” tall with a 7/8” by 1” shaft, with full ladder style grips. While weighing only 14.8 ounces, it tested at 1,000# before finishing. Five layer laminate of oak, butternut, and cherry accent. Tipped with a heavy, metal reinforced rubber tip. Finger grip derby with a sharp horn and striking edge.
